7 Slide the media card reader into the adapter until the tabs on the rails securely click into
position.
8 Connect the internal USB cable to the media card reader
9 Route the USB cable through the cable routing clip.
10 Connect the internal USB cable to the internal USB connector on the system board.
11 Close the computer cover (see "Closing the Computer Cover" on page 125).
CD/DVD Drive
CAUTION:
located in the Product Information Guide.
CAUTION:
before opening the cover.
108
Removing and Installing Parts
cable
tabs (2)
*
Not present on all computers.
Before you begin any of the procedures in this section, follow the safety instructions
To guard against electrical shock, always unplug your computer from the electrical outlet
Get other manuals https://www.bkmanuals.com
media card reader*
internal USB
connector