Floppy Drive; Removing A Floppy Drive - Dell WHL Owner's Manual

17 If the drive that you installed is the primary drive, insert a bootable floppy disk into drive A.
18 Turn on the computer.
19 Enter system setup (see "Entering System Setup" on page 131), and update the appropriate
Drive option.
20 Exit system setup, and restart the computer.
21 Partition and logically format your drive before you proceed to the next step.
See the documentation for your operating system for instructions.
22 Test the hard drive by running the Dell Diagnostics (see "Dell Diagnostics" on page 58).
23 If the drive you just installed is the primary drive, install your operating system on the hard
drive.

Floppy Drive

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.

Removing a Floppy Drive

1 Follow the procedures in "Before You Begin" on page 69.
2 Disconnect the power and data cables from the back of the floppy drive.
3 Disconnect the other end of the data cable from the system board.
Get other manuals https://www.bkmanuals.com
Removing and Installing Parts
101