Table of Contents
Advertisement
1 floppy drive
2 shoulder screws (4)
3 shoulder screw slots (2)
4. Attach the power and floppy-drive cables to the floppy drive.
1 power cable
2 floppy-drive cable
3 floppy-drive connector (DSKT)
5.
Replace the computer
cover.
6.
Enter system setup
and use the Diskette Drive option to enable your new floppy drive.
7. Verify that your computer works correctly by running the
CD/DVD Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before replacing the cover.
Removing a CD/DVD Drive
1. Follow the procedures in
"Before You
Dell
Diagnostics.
Begin."
Advertisement
Table of Contents
