Configuration
Keypad Access Code
STEP 1
Programming Access: Select whether an access code is
required to access Programming Setup.
NOTE:
Use dip switch settings to lock out access completely
(see
""Programming Keypad Access" on page
STEP 2
Clock and Schedule Access: Select whether an access code
is required to access the Clock and Schedule menus.
NOTE:
Use dip switch settings to lock out access completely
(see
""Programming Keypad Access" on page
STEP 3
Access Code: This screen will appear if you configured
an access code requirement for either the Programming
Setup or Clock and Scheduling Setup om the previous two
steps. Select an access code value (0 – 255) to access the
Programming Mode and/or the Clock and Schedule Mode.
The default value is 248.
Setting Clock and Schedule
NOTE:
Access to the Clock and Schedule Mode can be completely disabled via dip switch settings (see
Keypad Access" on page
page
11).
The main screen displays when not in Programming Setup Mode or
CLOCK SETUP Mode. The SuperSTAT will revert to this screen if no
entries are made after 10 minutes.
From the main screen, press the CLOCK SETUP button on the keypad to
configure the settings.
If the SuperSTAT has been configured to require an access code to
enter Programming Mode, this screen will appear
Code" on page
11). If you enter the wrong code, the screen will revert
to the main screen.
Time and Date
STEP 1
Time and Day: Set the hour, minute, AM or PM, and day of the
week.
STEP 2
Date: Set the month, date, and year.
11
11
4, or access can be restricted by requiring an access code
(see "Keypad Access
2800 Laura Lane
•
Middleton, WI 53562
REQUIRE CODE FOR
PROGRAMMING?
4).
REQUIRE CODE FOR
CLOCK/SCHED?
4).
ENTER ACCESS
CODE
TUE
9:00 AM
ENTER ACCESS
CODE
SET TIME & DAY:
12:00 AM
SET DATE:
|
800.288.9383
|
www.tcsbasys.com
"Programming
(see "Keypad Access Code" on
07-04-23
08-08-18
YES
YES
248
72F
000
MON