Table of Contents
Advertisement
2 Material damage
avoid
NB!
An incorrect dosage of fabric
softeners, detergents, care products
and cleaning agents can affect the
operation of the appliance.
Follow the manufacturer's dosing
▶
recommendations.
Exceeding the maximum load
quantity affects the operation of the
device.
Observe and do not exceed the
▶
maximum load for each
programme.
→ "Programs", page 27
The device is secured for transport with
transport protection devices. Transport
protection devices that are not
removed can lead to material damage
and damage to the device.
▶ Before commissioning, completely
remove and store all transport
protection devices.
Before each transport, fully install
▶
all transport protection devices to
avoid transport damage.
Improper connection of the water
supply hose can lead to material
damage.
Tighten the screw connections on
▶
the water supply by hand.
▶ It is best to connect the water supply
hose directly to the water tap
without any additional connecting
elements, such as adapters,
extensions, valves or the like.
▶ Make sure that the valve housing of
the water inlet hose is installed so that
it does not come into contact with the
environment and is not exposed to
external force.
Make sure that the inner diameter
▶
of the tap is at least 17 mm.
Avoid material damageNL
Make sure that the length of the
▶
thread on the connection to the
water tap is at least 10 mm.
A water pressure that is too low or too high can
hinder the function of the device.
▶ Make sure that the water pressure
on the water supply installation is at
least 100 kPa (1 bar) and at most
1000 kPa (10 bar).
If the water pressure exceeds the
▶
specified maximum value, a
pressure reducing valve must be
installed between the drinking
water connection and the hose set
of the device.
▶
Do not connect the appliance to the mixer
tap of an unpressurised water heater or
water heater.
Modified or damaged water hoses can
lead to material damage and damage
to the device.
Never kink, pinch, alter or cut
▶
water hoses.
Only use the supplied water hoses
▶
or original replacement hoses.
Reuse never used water hoses.
▶
Operation with polluted or too hot
water can cause material damage and
damage to the device.
Only use the appliance with cold
▶
tap water.
Unsuitable cleaning agents can
damage the surfaces of the device.
Do not use harsh or abrasive
▶
cleaning agents.
Do not use cleaning agents
▶
containing strong alcohol.
▶ Do not use hard scouring or
washing-up sponges.
Only clean the device with water
▶
and a soft, damp cloth.
11
Advertisement
Table of Contents
