Connector, Test Point And Selection Switch Descriptions; Connector And Test Point Descriptions; Connectors And Test Points - Texas Instruments LM5175EVM-HP User Manual

www.ti.com
2

Connector, Test Point and Selection Switch Descriptions

2.1

Connector and Test Point Descriptions

This EVM includes I/O connectors and test points as shown in
connected to input connectors, J1 and J2. The load must be connected to output connectors, J3 and J4.
Reference Designator
J1
J2
J3
J4
TP1 (VIN)
TP2 (GND)
TP3 (VOUT)
TP4 (GND)
TP5 (PGOOD)
TP6 (BIAS)
TP7(SYNC)
SNVU465 – February 2015
Submit Documentation Feedback
Connector, Test Point and Selection Switch Descriptions
Table 1. Connectors and Test Points
Copyright © 2015, Texas Instruments Incorporated
Table 1. The power supply must be
Description
Input voltage positive connection
Input voltage return connection
Output voltage connection
Output voltage return connection
Input voltage positive test point
Input voltage return test point
Output voltage positive test point
Output voltage return test point
Power Good output
BIAS voltage test point
SYNC input
5