Using The Fuel Shut-Off Valve; Starting And Stopping The Engine - Toro Z Master Professional 5000 Series Operator's Manual

Using the Fuel Shut-Off Valve

The fuel shut-off valve is located under the seat. Move the
seat forward to access the valve.
Close the fuel shut-off valve for transport, maintenance, and
storage.
Ensure that the fuel shut-off valve is open when starting the
engine.
1
2
G008948
1. On
Figure 17
2. Off
Starting and Stopping the
Engine
Starting the Engine
1. Raise the ROPS up and lock it into place, sit on the
seat, and fasten the seat belt.
2. Move the motion controls to the neutral locked
position.
3. Set the parking brake; refer to Setting the Parking
Brake (page 17).
4. Move the blade control switch (PTO) to the Off
position (Figure 18).
5. Move the throttle lever midway between the Slow and
Fast positions.
6. Turn the ignition key to the Start position (Figure 16).
When the engines starts, release the key.
19
Figure 18
g017006