Table of Contents
Advertisement
Suunto Ambit3 Peak
1. Go to www.movescount.com and log in.
2. Under PLAN & CREATE, browse to ROUTES to search and add existing routes or browse
to ROUTE PLANNER to create your own route.
3. Sync your Suunto Ambit3 Peak with Movescount using Suunto Movescount App (manually
start sync, see 3.22.2. Syncing with mobile app) or by using Moveslink and the supplied
USB cable.
Routes are also deleted through Movescount.
To delete a route:
1. Go to www.movescount.com and log in.
2. Under PLAN & CREATE, browse to ROUTE PLANNER.
3. Under MY ROUTES, click on the route you want to delete and click DELETE.
4. Sync your Suunto Ambit3 Peak with Movescount using Suunto Movescount App (manually
start sync, see 3.22.2. Syncing with mobile app) or by using Moveslink and the supplied
USB cable.
3.29.1. Navigating a route
You can navigate a route you have downloaded to your Suunto Ambit3 Peak from
Movescount (see 3.29. Routes) or recorded from an exercise (see 3.11.5. Recording tracks).
TIP: You can also navigate with sport modes (see 3.11.7. Navigating during exercise).
To navigate a route:
1. Press [Start Stop] to enter the start menu.
2. Scroll to NAVIGATION with [Start Stop] and enter with [Next] .
3. Scroll to Routes with [Start Stop] and enter with [Next] . The watch displays the number of
saved routes and after that a list of all your routes.
4. Scroll to the route you want to navigate with [Start Stop] or [Light Lock] . Select with [Next] .
5. Press [Next] and select Navigate.
Alternatively, you can select View to first preview a route and the altitude profile of the
route.
6. The watch displays all the waypoints on the selected route. Scroll to the waypoint you
want to use as the starting point with [Start Stop] or [Light Lock] . Accept with [Next] .
7. If you selected a waypoint in the middle of the route, Suunto Ambit3 Peak prompts you to
select the direction of the navigation. Press [Start Stop] to select Forwards or [Light Lock]
to select Backwards. If you selected the first waypoint as the starting point, Suunto Ambit3
Peak navigates the route forward (from the first to the last waypoint). If you selected the
last waypoint as the starting point, Suunto Ambit3 Peak navigates the route backwards
(from the last to the first waypoint).
8. If you are using the compass for the first time, you need to calibrate it (see 3.8.1.
Calibrating compass). After activating the compass, the watch starts searching for a GPS
signal and displays GPS found after acquiring the signal.
9. Start navigating to the first waypoint on the route. The watch informs you when you are
approaching the waypoint and automatically starts navigating to the next waypoint on the
route.
10. Before the last waypoint on the route the watch informs you that you have arrived at your
destination.
47
Advertisement
Table of Contents
