Alarm Clock; Time Syncing - Suunto AMBIT3 PEAK 2.4 User Manual

Suunto Ambit3 Peak
2. Change the values with [Start Stop] and [Light Lock] and save with [Next] .
3. Go back to the previous menu with [Back Lap] , or keep [Next] pressed to exit.
1.
Time/date
[...............]
Time
[...............]

3.37.1. Alarm clock

You can use your Suunto Ambit3 Peak as an alarm clock.
To access the alarm clock and set the alarm:
1. In the options menu, go to GENERAL, then to Time/date and Alarm.
2. Set the alarm on or off with [Start Stop] or [Light Lock] . Accept with [Next] .
3. Set the hours and minutes with [Start Stop] and [Light Lock] . Accept with [Next] .
4. Go back to the settings with [Back Lap] , or keep [Next] pressed to exit the options menu.
1.
Time/date
[...............]
Alarm off
[...............]
When the alarm is switched on, the alarm symbol is shown on most of the displays.
When the alarm sounds, you can:
Select Snooze by pressing [Light Lock] . The alarm stops and restarts every five minutes
•
until you stop it. You can snooze up to 12 times for a total of one hour.
Select Stop by pressing [Start Stop] . The alarm stops and restarts the same time the
•
following day, unless you switch the alarm off in the settings.
Stop
16:30
Snooze
NOTE: When snoozing, the alarm icon blinks in the TIME display.

3.37.2. Time syncing

Your Suunto Ambit3 Peak time can be updated through your mobile phone, computer
(Moveslink) or GPS time. If you have paired your watch with the Suunto Movescount App, time
and time zone are automatically synced with your mobile phone.
2.
Hours
16 :30
2-3.
Alarm
Off OO:00
24h
5min
3.
Hold to
exit
4.
Hold to
exit
20.9
16:30
Tuesday
2s
59