Table of Contents
Advertisement
Suunto Ambit3 Peak
4. The compass is shown as the last display on the custom sport mode.
Distance
To deactivate the compass, go back to ACTIVATE in the options menu and select End
compass.
3.11.9. Setting altitude during exercise
If you do not want to use FusedAlti (see 3.14. FusedAlti) and know exactly what your current
elevation is (for instance, from a sign on a well-traveled mountain trail), you can set your
manually set your altitude while recording an exercise. Manually setting the altitude turns off
FusedAlti if it was on.
To set your altitude during exercise:
1. While you are in a sport mode, keep [Next] pressed to access the options menu.
2. Scroll to ALTI-BARO with [Start Stop] and select with [Next] .
3. Select Altitude with [Next] .
4. Set your altitude using [Start Stop] and [Light Lock] .
5. Accept and exit by keeping [Next] pressed.
3.12. Find back
Suunto Ambit3 Peak automatically saves the starting point of your exercise, if you are using
GPS. With Find back, Suunto Ambit3 Peak can guide you directly back to your starting point
(or to the location where the GPS fix was established).
To find back:
1. While you are in a sport mode, keep [Next] pressed to access the options menu.
2. Press [Next] to select NAVIGATION.
3. Scroll to Find back with [Start Stop] and select with [Next] . The navigation guidance is
shown as the last display on the selected sport mode.
3.13. Firmware updates
You can update your Suunto Ambit3 Peak software through Movescount. When you update
the software, all logs are automatically moved to Movescount and deleted from the watch.
To update your Suunto Ambit3 Peak software:
1. Install Moveslink if you have not done so already.
2. Connect your Suunto Ambit3 Peak to your computer with the supplied USB cable.
3. If an update is available, your watch is updated automatically. Wait for the update to
complete before unplugging the USB cable.
24
Speed
Heart rate
273
˚
NW
Advertisement
Table of Contents
