Table of Contents
Advertisement
9 Settings
92
Heating circuit 1 only: The room temperature is sent exclusively to
heating circuit 1.
For all assigned HCs: The room temperature is sent to the heating
circuits assigned under prog. no. 42.
Action occupancy button (48)
You can select the assignment of the presence key here.
None: Pressing the presence key has no effect on the heating circuits.
Heating circuit 1 only: The presence key only affects heating circuit 1.
For all assigned HCs: The presence key affects the heating circuits
assigned under prog. no. 42.
Readjustment room sensor (54)
The temperature display of the value transmitted by the room sensor can
be corrected here.
Software version (70)
Display of the current software version.
9.2.3
Wireless
Device list (130-138)
The state of the respective device will be displayed under programme
numbers 130 to 138.
Delete all devices (140)
The wireless connections to all units is cancelled here.
9.2.4
Time programs
General information about the time programs.
Important
Time programs 1 and 2 are always assigned to the respective
heating circuits (1 and 2) and only displayed if these heating
circuits are present and also turned on in the menu Configuration
(prog.-no. 5710 and 5715).
Time program 3 can be used for heating circuit 3, for the DHW and for the
circulation pump, depending on the setting, and is always displayed.
Time program 4 can be used for the DHW and for the circulation pump,
depending on the setting, and is always displayed.
Time program 5 is not assigned a function and can be freely used for any
application using an output QX.
Preselection (500 – 600)
Selection of weekday or day blocks. The day blocks (Mon-Sun, Mon-Fri
and Sat-Sun) assist the adjustment. The set times are only copied to the
individual weekdays and can be changed in the individual day settings as
required.
The times of the individual weekdays always determine the heating
program.
Important
If a time in a group of days is changed, all 3 start/stop phases will
be copied to the day group automatically.
To select groups of days (Mon-Sun, Mon-Fri or Sat-Sun), turn the
control knob anti-clockwise; to select individual days (Mon, Tue,
Wed, Thu, Fri, Sat, Sun), turn the control knob clockwise.
7713465 - 05 - 23102019
Advertisement
Table of Contents
