Table of Contents
Advertisement
Fig.20
Side cover panels
1
Fig.21
Rear cover panel
2
Fig.22
Assembling the condensate piping
7713465 - 05 - 23102019
6.2.2
1. Attach the side cover panel as shown in the illustration
1
RA-0000278
2. Fit the rear cover panel to the side cover panels using the screws as
shown in the illustration
RA-0000279
6.2.3
After the boiler has been positioned and levelled, the siphon and
condensate piping must be fitted.
1. Push the condensate piping as far as it will go through the front
fastening hole and the support holes inside the boiler as shown in the
illustration.
1
RA-0000280
Caution
Risk of damage to boiler due to unsuitable foundation!
The foundation must have sufficient load carrying capacity for the
boiler weight.
Mounting the cover panels for transport openings
Important
The cover panels for closing the transport openings are in the
accessories box, which is fastened to the wood cladding of the
gas condensing boiler.
Installing siphon and condensate piping
6 Installation
47
Advertisement
Table of Contents
