Utility Connections; Standards And Codes - Blodgett SG3240E Installation Operation & Maintenance

Installation
Utility Connections --- Standards and Codes
THE INSTALLATION
TAINED HEREIN ARE FOR THE USE OF QUALI-
FIED INSTALLATION AND SERVICE PERSONNEL
ONLY. INSTALLATION OR SERVICE BY OTHER
THAN QUALIFIED PERSONNEL MAY RESULT IN
DAMAGE TO THE OVEN AND/OR INJURY TO
THE OPERATOR.
Qualified installation personnel are individuals, a
firm, a corporation, or a company which either in
person or through a representative are engaged
in, and responsible for:
the installation or replacement of gas piping
D
and the connection, installation, repair or serv-
icing of equipment.
the installation of electrical wiring from the elec-
D
tric meter, main control box or service outlet to
the electric appliance.
Qualified installation personnel must be experi-
enced in such work, familiar with all precautions
required, and have complied with all requirements
of state, national and/or local authorities having ju-
risdiction.
INSTRUCTIONS CON- U.S. and Canadian installations
Installation must conform with local codes, or in
the absence of local codes, with the National Fuel
Gas Code, NFPA54/ANSI Z223.1 ---Latest Edition,
the Natural Gas Installation Code CAN/CGA-
B149.1 or the Propane Installation Code, CAN/
CGA-B149.2 as applicable.
All ovens, when installed, must be electrically
grounded in accordance with local codes, or in the
absence of local codes, with the National Electrical
Code, ANSI/NFPA 70 ---Latest Edition and/or Cana-
dian National Electric Code C22.2 as applicable.
General export and Australian installations
Installation must conform with Local and National
codes and installation standards. Local installa-
tion codes and/or requirements may vary. If you
have any questions regarding the proper installa-
tion and/or operation of your Blodgett oven,
please contact your local distributor. If you do not
have a local distributor, please call the Blodgett
Oven Company at 0011-802-860-3700.
20