Primary And Secondary Station Connectors; Power Connection - Raymarine RAY63 Installation And Operation Instruction Manual

Primary and secondary station connectors

The connectors below are used to connect the supplied Fistmic and / or the optional Wired (Raymic)
handset to the Base station.
Connector

8.4 Power connection

The power supply should be connected as shown below:
1. Radio's fitted power cable.
2. In-line fuse.
3. Power supply positive (+) Red wire
4. 12 V dc power source (i.e.: Distribution panel).
5. Power supply negative (-) Black wire.
6. Suitable waterproof connection (Radio is supplied with bullet crimps on power supply wires.)
Cables and connections
Description
Primary station connector (8 pin
front Fistmic connector)
Secondary station connector
(12 pin rear handset connector)
Connects to
• Fistmic (supplied)
• Wireless hub via adaptor
(R70739)
• Wired handset
• Wired handset via Handset
extension cables (A80291,
A80292, A80290).
• Fistmic via Fistmic adaptor
cable (A80296)
• Wired handset via Handset
adaptor cable (A80297)
77