Wireless Handsets; Wireless Handset Charging - Raymarine RAY63 Installation And Operation Instruction Manual

10.1 Wireless handsets

Wireless handsets are compatible with the Ray63 and Ray73 VHF DSC radios. Using the optional
wireless accessories you can create up to 2 fully functional wireless handset stations.
As a minimum the Wireless hub (A80540), Wireless hub adaptor cable (R70739) and Wireless
handset (A80544) are required to create a wireless handset station. Additionally a Wireless speaker
(A80543) can be connected to each Wireless handset.
After connecting your Wireless hub to the Second station connector on the rear of your Ray63 /
Ray73 Base station, the process for setting up a wireless handset station should be:
1. Fully charge the Wireless handset.
2. Connect the Wireless handset to the Wireless hub.
3. If required, connect a Wireless speaker to the Wireless handset.
Warning: Retain a wired handset station
A wired handset station should always be connected and available.

Wireless handset charging

When inserted into the wireless handset charging holster the wireless handset will be charged
using inductive charging.
Attention
Ensure your wireless handset is fully charged before use.
With the Handset powered on the battery symbol will be displayed in the status bar at the top of
the screen.
116
Charging
Whilst charging a battery symbol will gradually fill up.
Charged
When fully charged the battery symbol will be full.