Panel Mounting - Ray53 - Raymarine RAY63 Installation And Operation Instruction Manual

Panel mounting — Ray53
Removing the mounting hole covers
Before the radio can be panel mounted the mounting hole covers must be removed.
1. Using a flat blade screw driver, insert the tip of the screw driver in the slot between the back
of the cover and the unit.
2. Carefully lever the cover forward away from the unit.
3. Repeat steps 1 and 2 for the remaining mounting hole covers.
Drilling out the mounting holes
When panel mounting the radio the mounting holes must be drilled out.
Guides for the mounting holes can be found on the corners of the unit, under the mounting hole
covers.
Installation 57