Activating/deactivating the display of VoIP status messages
If the function is activated, a VoIP status code for your service provider is
displayed.
Activate the function if, for example, you have problems with VoIP connections.
You will receive a provider-specific status code, which supports the service
when the problem is analyzed. You will find a table with the possible status
screens in the appendix (
¢
§Menu§
~
Status on HS
a
ú For information on making the setting on the Web configurator,
Checking the base station MAC address
Depending on your network configuration, you may have to enter your base
station MAC address, for example, into your router's access Control list. You can
check your base station MAC address:
M 4 O M 5
§Menu§
The base station MAC address is displayed.
a
ú For information on checking your MAC address on the Web configurator,
£
Page
£
Page
¢
¢
Settings
Base
Enter the system PIN and press
Select and press
Press and hold (idle status).
Press and hold (idle status).
140.
Making VoIP settings on the handset
145).
¢
Telephony
VoIP
.
§OK§
(‰ = on).
§OK§
£
Page
140.
93