Locating A Handset ("Paging"); Changing A Handset's Internal Number - Siemens Gigaset A580 User Manual

Locating a handset ("paging")

You can locate your handset using the base station.
¤
Briefly press the Registration/Paging key on the base station (
All handsets will ring simultaneously ("paging"), even if ringer melodies are
switched off.
The current (local) IP address for the base station appears in the handset
displays.
Example:
Å
192.168.0.100
Ending paging
¤
Briefly press the Registration/Paging key on the base station (
Or
¤
Press the Talk key c or End Call key a on any handset.
Or
¤
Do not press any key on the base station or handset:
After approx. 30 seconds, the paging call will end automatically.
Please note
u
An incoming external call will not interrupt the paging process.
u
If there is an internal connection between the two handsets, paging is not
possible.

Changing a handset's internal number

A handset is automatically assigned the lowest free number when it is regis-
tered. In the list of internal participants, the handsets are sorted according to
their internal number.
You can change the internal number of all registered handsets (1–6). The
numbers 1-6 can only be assigned once each.
k
§Menu§
Edit Handset Number
q
~
q ~
Paging
Open the list of registered handsets.
Press the Display key.
Select and press
Select handset.
Enter the new internal number (1–6). The handset's old number is
overwritten.
If necessary, select another handset and change its number.
.
§OK§
Using multiples handsets
£
Page 2).
£
Page 2).
73