Siemens Gigaset A580 User Manual page 118

Area: Settings for Connections
In this area you can make specific settings for each of your VoIP phone num-
bers.
You can make the following settings for each VoIP phone number configured
on your phone:
Volume for VoIP Calls
Depending on the VoIP provider, it is possible that the received voice/earpiece
volume is too low or too high, so that adjusting the volume via the handset is
not adequate.
Specify whether the received volume range is too high or too low. The follow-
ing options are available:
Low
Voice/earpiece volume is too high. Activate this option to reduce the volume
by 6 dB.
Normal
The voice/earpiece volume does not need to be raised/lowered.
High
Voice/earpiece volume is too low. Activate this option to increase the vol-
ume by 6 dB.
Voice codecs
Prerequisite: The
in the
Settings for Bandwidth
Select the voice codecs your phone is to use, and specify the order in which the
codecs are to be suggested when a VoIP connection is established via this VoIP
phone number.
¤
Apply the voice codecs that your phone is to suggest for outgoing calls into
the Selected codecs
To do this, in the
apply (you can mark several entries using the Shift key or the Ctrl key).
Select <Add.
¤
Move the voice codecs that you do not want the phone to use into the
Available codecs
Select the voice codecs in the
Remove>
¤
Sort the voice codecs in the
should be suggested to the receiving device when a connection is estab-
lished. To do this, use the
When establishing a VoIP connection, the phone suggests the 1st voice codec
in the Selected codecs
device does not accept this voice codec (e.g. because it is not supported), the
2nd voice codec on the list is suggested, and so on.
If the receiving device does not accept any of the voice codecs in the
list, the connection is not established. An appropriate message is dis-
codecs
played on the handset.
Own Codec preference
area.
list.
Available codecs
list.
button.
Selected codecs
Up
list to the receiving device to begin with. If the receiving
option is activated for the
list select the voice codec that you want to
list (see above) and click the
Selected codecs
list into the order in which they
and buttons.
Down
Setting the phone with the PC
Voice Quality
Selected
117