Siemens Gigaset A580 User Manual page 132

¤
In the
Messenger Account
Jabber server or another provider's message server (Other).
The access data for
played in
Jabber ID,
you can also register with the Gigaset.net Jabber server through your PC.
¤
Enter the user ID (maximum 50 characters) and password (maximum
20 characters) that you used to register with the message server in the
and
ber ID Authentication password
Account Gigaset.net,
¤
In the
Jabber server
sage server with which you are registered for instant messaging.
Max. 74 alphanumeric characters.
If you have selected
ured with the name of the Gigaset.net server.
¤
Enter the number of the communication port on the Jabber server in the
Jabber server port
If you have selected
configured.
¤
Enter a resource name (maximum 20 characters) in the
The default is phone.
¤
Enter the priority for your phone in the
between -128 (highest priority) and 127 (lowest priority) for the priority.
The default is: 5
¤
Select Set.
Setting up a Gigaset.net Jabber account
Your phone is already registered with the Gigaset.net Jabber server. An account
has been assigned to your phone.
To chat with other Gigaset.net subscribers via this account, you must transfer
the required Gigaset.net subscribers to a Contact list (Buddy list) on your PC.
You can use any conventional Jabber client for this (e.g. PSI, Miranda; see e.g.
http://www.swissjabber.ch).
Do the following to use your Gigaset.net Jabber account:
¤
Start the Web configurator, open the
Web page and select the
data is displayed in
to create a Buddy list via the Jabber client on the PC.
¤
Start your Jabber client on the PC.
¤
Enter your Gigaset.net
Jabber ID consists of your Gigaset.net number and "@jabber.gigaset.net"
Example: 12345678901#9@jabber.gigaset.net
¤
Then enter your
field, select whether you wish to use the
Gigaset.net is already stored in the base station. It is dis-
Authentication password
fields. If you have selected =
the fields are preset with your Gigaset.net account.
field, enter the IP address or the DNS name of the mes-
Messenger Account =
field. The default port is 5222.
Messenger Account =
Messenger Account Gigaset.net
and
Jabber ID Authentication
on the Jabber client as a new account. The
Jabber ID
Authentication password.
Setting the phone with the PC
and server. With this data
Jabber
Gigaset.net, the field is preconfig-
Gigaset.net, the port number is pre-
Resource
field. Select a number
Priority
¢
Settings Messaging
field. Your account
password. You will need these
Gigaset.net
Jab-
Messenger
field.
¢
Messenger
131