Manual Registration; Gigaset 1000 To 4000 And Other Handsets With Gap Functionality; De-Registering Handsets; Paging A Handset - Siemens Gigaset C200 Instructions Manual

Manual registration:

Gigaset 1000 to 4000 and other handsets with GAP functionality

This section describes how to connect handsets belonging to the Gigaset families, hand-
sets A 2, C 1, S 1 or handsets of other devices with GAP functionality to your C 200/C
250 .
1. On the handset
Start to register the handset as described in its operating instructions.
2. On the base
The next unassigned internal number (1-6) is automatically assigned to the handset as
it is registered. If all the numbers have been assigned, number 6 is overwritten provided
the handset is in idle status.

De-registering handsets

You can de-register any registered handset from any registered C 2 handset.
[________]
INT
[__________] [______________]
MENU
[__________] [_____________________________________________________________]
De-register Handset
[_______]
OK
[________]
OK

Paging a handset

If you have mislaid your handset you can 'page' it with the help of the base. The Regis-
tration/Paging key is on the base to the right of the handset shell (page 58).
Paging ends automatically after 30 seconds.
N
i
The paging call can be heard even when the ringer is switched off.
N
Registering and de-registering handsets
Press the Registration/Paging key on the base
(page 58) until you hear a signal tone (C 250 only)
(approx. 3 seconds). Registration is initiated.
Open list of handsets.
Select the handset you wish to de-register (your own
handset is checked
Select the menu item and confirm.
[_________]
OK
Enter the current system PIN (the default setting is
0000) and confirm.
Press the display key to confirm the prompt.
Press the Registration/Paging key on the base for 1
second. All handsets will ring together ('Paging').
End paging:
Press the Registration/Paging key on the base again
for 1 second or press the top half of the
‰
) and press the display key.
c
key.
75