Attaching The Belt Clip - Siemens Gigaset 4215 User Manual

Leave the handset in the base station for about 12–14 hours the first
time the batteries are charged. The charging status symbol flashes on
the handset, indicating that the batteries are being charged:
Ý
Batteries empty (symbol
flashes)
Ü
Batteries
Once the initial charging operation is completed, you can re-
G
place your handset into the base station or charger after each
call. Charging is controlled electronically. This ensures opti-
mum charging and prolongs battery life.
The batteries heat up during charging. This is normal and not
G
dangerous.
The battery charging status is correctly displayed only after
G
uninterrupted charging/discharging. You should therefore avo-
id opening the battery compartment unnecessarily.

Attaching the Belt Clip

Push the belt clip onto the back of the handset until the tabs click into
place.
Turning Handset On/Off
a
To turn handset on/off, hold down the End key – you will hear a con-
firmation beep.
The handset is turned on as soon as you insert the batteries and
place the handset in the base station.
Û
1
Ú
/ charged
3
Setting Up the Telephone
2
Batteries / charged
3
Batteries fully charged
5