Belt Clip And Headset - Siemens Gigaset C450 User Manual

First Steps
u
The batteries may warm up as they are
charging. This is not dangerous.
u
After a time the charge capacity of the bat-
teries will decrease for technical reasons.
Note:
You will find explanations for the symbols and typo-
graphical conventions used in this user guide in the
appendix, page 25.
Setting the date and time
¢ ¢
Settings Date/Time
§Menu§
~
Enter the day, month and year
with 6 digits and press
to move between the fields.
~
Enter hours and minutes with 4
digits (e.g. 0 7 1 5 for 07.15 hrs)
and press
between the fields.
Once the phone is registered and the time
set, the idle display looks as shown on
page 1.
Your phone is now ready for use.

Belt clip and headset

By using a belt clip and headset (optional) you
can easily make your mobile phone a constant
companion both inside the building and in its
immediate vicinity.
Attaching the belt clip
There are notches for attaching the belt clip on
the side of the handset at approximately the
same height as the display.
¤
Press the belt clip onto the back of the hand-
set so that the protrusions on the belt clip
engage with the notches.
The belt clip's clasp must be pointing towards
the battery compartment.
Connection socket for headset
You can connect the following types of headset
(with jack connector): HAMA Plantronics M40,
MX100 and MX150.
q
. Use
§OK§
q
. Use to move
§OK§
6