Control Panel; Mode Description - Danby DPA135E1WDB Owner's Manual

OPERATING INSTRUCTIONS

CONTROL PANEL

1. Timer indicator
2. Wireless connection indicator
3. Timer button
4. High fan indicator
5. Low fan indicator
6. Auto mode indicator
7. Fan button
8. Display panel
9. Temperature control buttons
10. Cool mode indicator
11. Fan mode indicator
12. Dry mode indicator
13. Mode button
14. Sleep mode indicator
15. Power button
OPERATING MODE CHART
Press the mode button repeatedly to choose the desired mode.

MODE DESCRIPTION

Cool • Use the temperature control buttons to set the
temperature.
• Use the fan button to set the fan speed.
• Temperature range: 18 - 32°C (64 - 90°F).
Fan • Press the fan button to set the fan speed.
Smart • The appliance will choose whether to run cool or
fan mode automatically based on the ambient
temperature.
• Press the fan button to set the fan speed.
• The appliance will run in fan mode when the ambient
temperature is below 23°C (73°F) and in cool mode
when the ambient temperature is above 23°C (73°F).
Dry • The fan speed will be set to auto.
• Water should be drained from the continuous
drain using a hose to a fl oor drain for optimal
dehumidifi cation.
• Not using a continuous drain hose and allowing
the water to accumulate into the condenser drain
reservoir is possible, but could result in re-introducing
moisture to the room, and frequent emptying of the
reservoir. This can be lessened by using the drain
hose from the condenser drain into a fl oor drain.
1 4
2 5
6
3
7
10
8
13
9
EXHAUST HOSE? DRAIN HOSE?
Yes No
Optional No
Mandatory in No
cool mode.
Optional in fan
mode.
Optional Using the drain
hose with the
continuous drain is
recommended.
Condenser drain,
if necessary.
10 14
11
12
15