Danby DPA135E1WDB Owner's Manual page 18

OPERATING INSTRUCTIONS
Add A Device - AP (Access Point) Mode
The appliance will default to CF mode. If you have diffi culty connecting to CF mode, try AP mode instead.
To change to AP mode, press the fan button 6 times within 4 seconds, wait 10 seconds for the display to
show "AP" and the proceed with the connection.
1. Hold the fan button and the minus sign on the control panel at the same time to activate the wireless
connection. The display will show "AP" to show the wireless is searching for a connection.
2. Click the plus sign in the top right corner of the app and then tap "Add Device".
3. Tap the logo of the type of appliance you are trying to connect.
4. Input the wifi password.
5. Click the arrows in the top right corner of the app and select AP mode.
6. The codes in the app will indicate the status of the connection.
• "PP" means "searching for router"
• "SA" means "connecting to the router"
• "AP" means "connected to the server"
If the wireless fails to connect, reset the connection using one of the below methods.
• Press the fan button on the control panel 6 times within 4 seconds.
• Hold the power button on the control panel for 5 seconds.
• Hold the mode button on the control panel for 3 seconds.
• Wait 10 seconds for the control panel to fl ash "CF" or "AP" 5 times before trying to connect again.
<
Add Manually Auto Scan
Air Condi oner Fresh Air Split Air
(BT+Wi-Fi)
Purifier Condi oner
Security Window Type Portable Air
Camera
Air Condi oner Condi oner
Swimming
Dehumidifier
Pool H/P
<
Connect phone to device's
wifi hotspot
1.Please connect your phone to the hotspot
shown below
12:30
< Wi-Fi
SmartLife-XXXX
Home
5G
Guest
4G
2.Return to this app and con nue adding
devices
Connect now
Confirm hot spot connecton,next
Cancel AP Mode
CF Mode
Default
Reset the device first.
Method1:When there is a DISPLAY key on the
AP Mode
remote control, press the DISPLAY key 6 mes
in the me of 8 seconds; when there is no
DISPLAY key on the remote control, press the
ECO key 6 mes in the me of 8 seconds un l
the device beeps twice and the LCD screen
show AP .
Method2:Press the General key 9 mes in the
me of 8 seconds un l the device beeps twice
and the LCD screen show AP .
Rese ng Devices <
Confirm the device is reset.
Next
<
WLAN
AVAILABLE NETWORKS
WIFI1
SmartLife-****
office wifi
Cancel AP Mode
Reset the device first.
Rese ng Devices <
Confirm the device is reset.
Next
Cancel
Adding device...
Ensure that the device is powered on.
2%
Scan Register on Ini alize the
devices. Cloud. devices.
Cancel
Select 2.4 Ghz
Wi-Fi Network and
enter password
2.4GHz 5GHz
*******
Password
Next
<
Add Device
Device added
successfully
Sample1
Done