Control Panel; Function Instruction - Danby DAC0100B5WDB Owner's Manual

OPERATING INSTRUCTIONS

CONTROL PANEL

1. Display panel
• Displays the set temperature
• While in fan mode, shows the room
temperature
• Energy saver mode indicator
A. Energy saver mode indicator
• Wireless connection indicator
B. Wireless connection indicator
• Cool mode indicator
C. Cool mode indicator
• Fan mode indicator
D. Fan mode indicator
• Temperature and timer display
E. Temperature display
• Temperature scale indicator
F. Temperature scale indicator
• Filter reset indicator
G. Filter reset indicator
2. Mode button:
• Used to choose the operating mode.
• The fi lter reset indicator will illuminate after
250 hours of use as a reminder to clean the
fi lter. After cleaning the fi lter, press and hold
the mode button for 3 seconds to clear the
fi lter reset indicator.
3. Increase and decrease buttons:
• Used to adjust the set temperature.
• Press and hold the increase and decrease
buttons for 3 seconds to change between °C
and °F.
4. Power Button: Used to turn the appliance on or
off.
1
A
C E
D
- +
2
MODE
B
F
G
3 4

FUNCTION INSTRUCTION

Operating Modes
• Cool Mode
Choose cool mode to set the cooling function. Use
the up and down arrows to choose the desired
temperature. When cool mode is selected, the fan
speed can be adjusted by pressing the fan button on
the remote control.
The temperature can be set within a range of 17°C -
30°C (62°F - 86°F).
• Fan Mode
Choose fan mode to run the internal fan without
engaging the cooling function. Press the fan button
on the remote control repeatedly to choose the fan
speed.
10