Danby DPA135E1WDB Owner's Manual page 17

OPERATING INSTRUCTIONS
Add A Device - CF (Quick Connection) Mode
1. Power on the appliance that you wish to connect.
2. Hold the fan button and the minus sign on the control panel at the same time to activate the wireless
connection. The display will show "CF" to show the wireless is searching for a connection.
3. Click the plus sign in the top right corner of the app and then tap "Add Device".
4. Tap the logo of the type of appliance you are trying to connect.
5. Input the wifi password.
6. Click the arrows in the top right corner of the app and select CF mode.
7. The codes in the app will indicate the status of the connection.
• "PP" means "searching for router"
• "SA" means "connecting to the router"
• "AP" means "connected to the server"
If the wireless fails to connect, reset the connection using one of the below methods.
• Press the fan button on the control panel 6 times within 4 seconds.
• Hold the power button on the control panel for 5 seconds.
• Hold the mode button on the control panel for 3 seconds.
• Wait 10 seconds for the control panel to fl ash "CF" or "AP" 5 times before trying to connect again.
Work office
Welcome Home
Set your home loca on for more
informa on
All Devices Living Room
No devices
Add Device
Home
Cancel
Select 2.4 Ghz
Wi-Fi Network and
enter password
2.4GHz
*******
Password
<
Add Manually
Air Condi oner
...
(BT+Wi-Fi)
Master
Security
Camera
Dehumidifier
Me
Cancel
5GHz
Scan
devices.
Next
Auto Scan
Fresh Air Split Air
Purifier Condi oner
Window Type
Portable Air
Air Condi oner Condi oner
Swimming
Pool H/P
Adding device...
Ensure that the device is powered on.
2%
Register on Ini alize the
Cloud. devices.
Cancel CF Mode
Reset the device first.
<
Rese ng Devices
Confirm the device is reset.
Next
<
Add Device
Device added
successfully
Sample1
Done