Connecting Speakers - Sherwood RD-7108 User Manual

7 . CONNECTING SPEAKERS

• Be sure to connect speakers firmly and correctly
according to the channel(left and right) and the
polarity(+ and -). If the connections are faulty, no
sound will be heard from the speakers, and if the
polarity of the speaker connection is incorrect, the
sound will be unnatural and lack bass.
• For installing the speakers, refer to "Speaker
placement" on page 16.
• After installing the speakers, first adjust the speaker
settings according to your environment and speaker
layout.(For details, refer to "Adjusting the speaker
settings" on page 17.)
Caution :
• Be sure to use the speakers with the impedance of 6
ohms or above.
• Do not let the bare speaker wires touch each other or
any metal part of this unit. This could damage this unit
and/or the speakers.
8 . SWITCHED AC OUTLET
• This outlet is switched on(power-on mode) and
off(standby mode) according to power control as
follows(Maximum total capacity is 1 A, 100 W).
Standby mode - Switched AC outlet off
Power-on mode - Switched AC outlet on
9 . AC INPUT CORD
• Plug this cord into a wall AC outlet.
Surround
left
Front left
FRONT SURROUND
SPEAKERS SPEAKERS
(6 ) (6 )
Surround
Front right
right
AC OUTLET
SWITCHED
120V~60Hz
100W 1A MAX
AC INPUT
120V~60Hz
7
Surround
back
SURROUND CENTER
BACK SPEAKER
(6 ) (6 )
(Front)
Center
2.5A