Zone Individual Operation; Set The Sensor Method; Set The Priority Sensor; Zone Group Operation - Fujitsu UTY-RNRT Operation Manual

2-3-2 Zone Individual Operation

(1) Touch the [Zone Operation] on
the "Zone Select" screen.
(2) "Zone Operation" screen is
displayed. Touch the zone to
toggle its outlet opening and
closing.
The outlet of the zone with a check mark opens.
NOTES
• Zones that can be confi gured for outlet opening
and closing are displayed.
• When all zone outlets close, the following screen is
displayed.
Zone Operation
Setting not perfomed. Always perform one setting.
(3) Touch the [OK] on the "Zone Operation" screen to
submit the data to the zone interface, and return to the
"Zone Select" screen.

2-3-3 Set the Sensor Method

(1) Touch the [Sensor Method] on
the "Zone Select" screen.
(2) "Sensor Method" screen is
displayed. Touch the [Primary
Sensor Control] or [Average
Temperature Control].
(3) Touch the [OK] on the "Sensor Method" screen to
submit the data to the zone interface, and return to the
"Zone Select" screen.
Zone Select
Zone
Sensor Priority
Operation
Method Sensor

Zone Group Operation

[ Group3 ]
Back
Zone Operation
Zone1 Zone2 Zone3
Zone4 Zone5 Zone6
Zone7 Zone8
Cancel OK
Close
Zone Select
Zone
Sensor Priority
Operation
Method Sensor
Zone Group Operation
[ Group3 ]
Back
Sensor Method
Primary Sensor Control
Average Temprature Control
Cancel OK

2-3-4 Set the Priority Sensor

(1) Touch the [Priority Sensor] on
the "Zone Select" screen.
(2) The "Priority Sensor" screen is
displayed. This screen con-
tains up to 4 pages. Touch the
[Next Page] or [Previous Page]
to navigate pages. Touch the
sensor to confi gure.
(3) Touch [OK] to submit the data to the zone interface, and
return to the "Zone Select" screen.
2-3-5 Zone Group Operation
Zones registered to a group can be operated in bulk.
(1) Touch the [Zone Group Op-
eration] on the "Zone Select"
screen.
(2) The "Zone Group Operation"
screen is displayed. This
screen contains up to 2 pages.
Touch the [Next Page] or [Pre-
vious Page] to navigate pages.
Touch the group to operate,
and touch the [Enable].
(3) Touch the [OK] on the "Zone Group Operation" screen
to submit the data to the zone interface, and return to
the "Zone Select" screen.
Zone Select
Zone
Sensor Priority
Operation
Method Sensor
Zone Group Operation
[ Group3 ]
Back
Priority Sensor Page 1/ 4
Sensor1
Sensor2
Sensor3
Next
Cancel OK
Page
Zone Select
Zone
Sensor Priority
Operation
Method Sensor
Zone Group Operation
[ Group3 ]
Back
Zone Group Operation Page 1/ 2
Zone List - Zone7
All Zone
- Zone1 - Zone8
- Zone2
Day
- Zone3 Sensor
- Sensor3
- Zone4
- Zone5
Night Enable
- Zone6
Next
Cancel OK
Page
En-8