Weekly Timer Setting (For Administrator); Enable Schedule - Fujitsu UTY-RNRT Operation Manual

(4)
Auto Off Timer
Fri 10:00AM
Enable /Disable [Enable]
Operation Stop Time [In 30 min.]
Time Range Setting [ – ]
Cancel OK
When the [OK] is touched, the display returns to the "Auto
Off Timer" screen.
Set the time range of Auto Off Timer
(6) Touch the [Time Range Setting] on the "Auto Off Timer"
screen.
(7) "Time Range Setting" screen is displayed. Touch the
[Time Range] .
(6)
Auto Off Timer
Fri 10:00AM
Enable /Disable [Enable]
Operation Stop Time [In 30 min.]
Time Range Setting [ – ]
Cancel OK
(8) "Time Range" is displayed.
When specifying a time range
for the "Auto Off Timer", touch
[Range Spec.] and when
enabling the setting all day,
touch [Continuous].
When the [OK] is touched, the display returns to the
"Time Range Setting" screen. When the [Continuous] is
selected, go to (14).
(9) Touch the [Start Time] on the "Time Range Setting"
screen.
(10) "Start Time" screen is displayed. Set the Start Time by
touching [ ] or [ ] on the "Start Time" screen.
(9)
Time Range Setting Fri 10:00AM
Time Range [Range Spec.]
Start Time [--:--]
End Time [--:--]
Cancel OK
When the [OK] is touched, the display returns to the
"Time Range Setting" screen.
NOTE
Setting screen format corresponds to the preference
of the "Display format Setting".
(11) Touch the [End Time] on the "Time Range Setting"
screen.
(12) "End Time" screen is displayed. Set the End Time by
touching [ ] or [ ].
(11)
Time Range Setting
Fri 10:00AM
Time Range [Range Spec.]
Start Time [08:40AM]
End Time [--:--]
Cancel OK
When the [OK] is touched, the display returns to the
"Time Range Setting" screen.
(5)
Operation Stop Time
Fri 10:00AM
After the Manual Operation
In
30
min.
Cancel OK
(7)
Time Range Setting
Fri 10:00AM
Time Range [Continuous]
Start Time [--:--]
End Time [--:--]
Cancel OK
Time Range
Range Spec.
Continuous
Cancel OK
(10)
Start Time
Fri 10:00AM
hour min.
08 40
AM
Cancel OK
(12)
End Time
Fri 10:00AM
hour min.
05 40
PM
Cancel OK
(13) Touch the [OK] on the "Time
Range Setting" screen. The
display returns to the "Auto Off
Timer" screen.
Apply the setting.
(14) Touch the [OK] on the "Auto Off
Timer" screen. After the setting
change screen is displayed,
the display returns to the "Timer
Setting" screen.

3-5 Weekly Timer Setting (for administrator)

Weekly operation schedule can be set. Two schedule pat-
terns can be created. Up to 8 times setting for each day can
be set.
(1) Touch the [Weekly Timer Setting] on the "Main Menu"
screen. After the "Password Verifi cation" screen is dis-
played, enter the password and touch [OK].
(2) "Weekly Timer Setting" screen is displayed.
(1)
Main Menu
Page 1/ 3
Air Flow Direction
Comfort
Setting
Weekly Timer
Timer Setting
Setting
Next
Monitor
Page
The following contents are set:

• Enable Schedule:

The schedule to be used is selected or the Weekly
Timer is disabled temporarily .
• Schedule Setting:
The daily operating schedule is created. Two schedule
patterns can be created. Up to 8 times setting for each
day can be set.
• Day Off Setting:
Weekly Timer can be disabled for any day within a
range of 1 week. This is convenient when operation is
not necessary on holidays, etc. When the set day has
passed, its setting is cleared.
When the item to be set is touched, each setting screen
is displayed. Refer to the description of each item for
details. When each setting is complete or canceled, the
display returns to this screen. When [Back] is touched,
the display returns to the "Main Menu" screen.
3-5-1 Enable Schedule
Select the schedule to be used.
(1) Touch the [Enable Schedule] on the "Weekly Timer Set-
ting" screen.
(2) "Enable Schedule" screen is displayed. Select and touch
[Schedule 1] or [Schedule 2].
(1)
Weekly Timer Setting
Enable Schedule [None]
Schedule Setting [None]
Day Off Setting [None]
Back
Time Range Setting
Fri 10:00AM
Time Range [Range Spec.]
Start Time [08:40AM]
End Time [05:40PM]
Cancel OK
Auto Off Timer Fri 10:00AM
Enable /Disable [Enable]
Operation Stop Time [In 30 min.]
Time Range Setting
[08:40AM–05:40PM]
Cancel OK
(2)
Weekly Timer Setting
Enable Schedule [None]
Schedule Setting [None]
Day Off Setting [None]
Back
(2)
Enable Schedule
Schedule 1
Schedule 2
None
Cancel OK
En-12