Lincoln Electric BURNY KALIBURN Spirit II 275 User Manual page 2

Prologue
Revision History
Rev ECO#
A -
B LAD0202
C LAD0217
LAD0228
D
LAD0223
E LAD0260
F LAD0264
This documentation may not be copied, photocopied, reproduced, translated,
or reduced to any electronic medium or machine-readable format without
FASTON is a trademark of the TE Connectivity Ltd family of companies.
Other logos, products and company names mentioned herein
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
Author Date
CAD 02/04/2013
CAD 06/07/2013
CAD 08/06/2013
CAD 08/28/2013
CAD 03/18/2014
CAD 03/31/2014
explicit written permission from Kaliburn.
may be trademarks of their respective owners.
© Copyright 2013-2014 Lincoln Global, Inc.
Kaliburn Inc.
a Lincoln Electric Company
4130 Carolina Commerce Parkway
Ladson, SC 29456 USA
Description of Change
Initial Release.
Added 100A/150A silver electrodes, replaced RHF with
ISC, corrected system interconnect diagrams, changed
rated inlet gas pressure to 115 psi, added 100 psi
minimum to inlet gas pressure.
Deionization filter cartridge (500510) replaced sediment
filter (300152). Parts list updated.
Expanded notes on System Interconnection diagrams to
clarify cabling requirements for various configurations.
Corrected contact ratings on page 3-19.
Added pinouts to CII, FII, JII cables in Parts List.
Corrected part numbers for coolant/power leads and
work ground in Parts List.
Inductor (707150) replaced by (707155). 10" fan
(500516) replaced by (284031). Added notes about torch
handle vent hole. Updated Chopper Test Procedure.
Added "BK" prefix to all part numbers. Added PCB
Outline Dwgs and corrected electrode tool in Part List.
Corrected Remote On/Off info in Installation section.
ii
Spirit II User's Manual