Sharp UX-510 Operation Manual page 79

5
Press the START key.
6
Press the "#" key or the "*" until the de-
sired operation appears in the display.
The operations will appear in the follow-
ing order:
Transmission ("SEND")
Polling
Broadcasting
7
Press the START key and then continue
with the specific procedure for your op-
eration (see the following pages).
Transmission
(Continued from "Initial procedure".)
8
Press "1" if you want the document to be
scanned into memory and then transmit-
ted, or "2" if you want the document to
be transmitted directly from the feeder.
(Note: If you select "2", you can include
a timer setting in the program.)
If you pressed "1", go to Step 12. If
you pressed "2" and don't want to
make a timer setting, go to Step 11.
9
Enter the time at which you want the op-
eration to take place (2 digits for the
hour and 2 digits for the minute).
10
Press "*" to select A.M., or "#" to select
P.M.
11
Press the START key.
Chapter 8 Special Functions
START
or
START
1
2
or
0 9 2
(Example: 9:25)
or
START
5
69