Sharp UX-510 Operation Manual page 17

Sharp ux-510: operation manual
Hide thumbs Also See for UX-510:
Table of Contents

Advertisement

Comments:
Your fax is set for touch-tone dialing. If you are on a pulse dial (rotary) line,
you must set the fax for pulse dialing by changing Option Setting 8. This
procedure is described in Chapter 9, "Optional Settings".
If you intend to use a computer fax modem on the same phone line, you must
reset Option Setting 13 to OFF in order to prevent transmission and reception
errors. This procedure is described in Chapter 9, "Optional Settings".
3
4
T E L
.
S E T
T E L
.
L I N
E
Chapter 1
Connect the handset as shown and
place it on the handset rest.
Insert one end of the telephone line
cord into the TEL. LINE jack. In-
sert the other end into a standard
(RJ11C) single-line telephone wall
jack.
Be sure to insert the telephone line
cord into the TEL. LINE jack. Do
not insert it into the TEL. SET
jack.
Wall jack
Installation
Handset
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ux-500Ux 510 - b/w thermal transfer

Table of Contents