Sharp UX-510 Operation Manual page 62

Chapter 7 Answering Machine Hookup
3
Set the time in seconds by entering a two-
digit number from "01" to "10" (enter
"01" for 1 second, "02" for 2 seconds,
etc.). To turn off the function, enter "00".
Note: We recommend that you do not
set Quiet Detect Time below 3 sec-
onds.
4
Press the STOP key to return to the date
and time display.
Fax reception when the answering machine fails
When this function is turned on, your fax will answer the call after 5 rings if the
answering machine for some reason fails to answer before that time. This en-
sures that you will receive fax messages even if the answering machine's tape
fills up or the answering machine is not turned on.
This function has been turned off at the factory. If you want to turn it on, follow-
ing the steps below.
Note: When this function is turned on, make sure that the answering machine
is set to answer on 4 rings or less. If it isn't, the fax will always answer first,
preventing callers from leaving voice messages.
1
Press the FUNCTION key and then the
"4" key. OPTION SETTING will appear
in the display.
2
Press the "*" key 9 times.
FAX RX TAD FAILS will appear in the
display.
3
Press "1" to turn the function on, or "2"
to turn it off.
4
Press the STOP key to return to the date
and time display.
52
0 4
(Example)
STOP
FUNCTION
4
1 2
or
STOP