Sharp UX-510 Operation Manual page 72

Chapter 8 Special Functions
5
Press the START key. Transmission will
begin.
A Transaction Report is automatically
printed out after Broadcasting is com-
pleted. Check the "Note" column of the
report to see if any of the locations are
marked "Busy" or have a communica-
tion error code. If so, send the docu-
ment to those locations again.
Broadcasting using a Group Key
If the fax machines to which you want to broadcast have all been programmed
into one Group Key, you can perform the broadcasting operation using the fol-
lowing simplified procedure:
1
Load the document(s).
Make any desired transmission set-
tings (resolution, contrast, etc.).
2
Press the appropriate Group Key. Trans-
mission will begin.
62
START
18/G1
37
(Example)