Sharp UX-510 Operation Manual page 56

Chapter 7 Answering Machine Hookup
Activating the hookup
Before you go out, activate the answering machine hookup as follows:
1
Set Option Setting 9, TAD CON-
NECTED, to YES:
Press the FUNCTION key and then
the "4" key. OPTION SETTING will
appear in the display.
Press the "#" key nine times.
TAD CONNECTED will appear in the
display.
Press "1" to select YES. (To deactivate
the hookup, press "2" for NO.)
Press the STOP key to return to the
date and time display.
2
Set the reception mode of your fax to
AUTO by pressing the RECEPTION
MODE key.
Important: For the hook-up to operate
properly, the reception mode of your
fax must be set to AUTO.
3
Set your answering machine to auto answer. It must answer on
no more than two rings (if not, you may not be able to receive
faxes sent by automatic dialing).
If your answering machine has a toll saver function, make sure that it will
answer by the fourth ring.
4
When you return and turn off your answering machine, you
must set TAD CONNECTED to NO (see Step 1 above) if you
will be using your fax in AUTO reception mode. If you will
only be using MANUAL reception mode, you can leave TAD
CONNECTED set to YES.
Note: The call counter on your answering machine may indicate that voice
messages were received, when only fax messages were received.
46
FUNCTION
4
1
STOP
RECEPTION
MODE