Changing The Default Settings Of The Amplifier - Sharp SD-HX500 Operation Manual

Changing the default settings of the amplifier (continued)
SD-HX500
ENGLISH
! Changing crossover frequency
Change the level above which subwoofer frequencies are cut, to adjust the balance
with the front speakers. When the speaker setting is "SMALL", low frequencies from
the speaker are cut. It is recommended to set the level slightly above that of the low-
est front speaker frequency (the lowest reproducible frequency).
1
Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET
UP button.
2
Within 10 seconds, press the
select "X-FREQ", and press the ENTER but-
ton.
3
Within 10 seconds, press the
select frequency and press the ENTER but-
ton.
4
Press the RETURN
The setting is complete.
Adjustable frequency
range
80 Hz
100 Hz *
120 Hz
150 Hz
(*) indicates the default setting.
Note:
The crossover frequency setting is invalid when playing DVD-Audio discs.
E-49
or button to
or button to
button twice.
Recommended frequency range
The lowest reproducible frequency of the front speakers
is below 80 Hz.
The lowest reproducible frequency of the front speakers
is between 80 and 100 Hz.
The lowest reproducible frequency of the front speakers
is between 100 and 120 Hz.
The lowest reproducible frequency of the front speakers
is between 120 and 150 Hz.
In the stop mode, you can change the amplifier settings on the TV
screen.
1
Set the MODE 1/MODE 2 switch to MODE
2 and press the AMP SET UP button.
The amplifier setting screen appears.
2
Press the or button to select the menu and press the ENTER
button.
3
Press the , , or button to change the
setting and press the ENTER button.
(The number of repetition depends on the setting item.)
To change other settings, begin from step 2.
4
Press the RETURN button twice.
The setting is complete.
Note:
You cannot change the amplifier settings unless the input source is set to DVD/CD.
AMPLIFIER SETUP
SPEAKER SIZE
SPEAKER DELAY
SPEAKER LEVEL
TEST TONE
CROSSOVER
SELECT
ENTER ENTER RETURN
SPEAKER SIZE
FRONT SMALL
CENTER SMALL
SURROUND SMALL
SUB WOOFER YES
SELECT CHANGE
RETURN
Repeat the operation as instructed.