Tv Connection - Sharp SD-HX500 Operation Manual

TV connection

SD-HX500
ENGLISH
Unplug all equipment before making any connections.
Connect a TV with the supplied video cable.
Main unit
Notes:
! Change the TV input in accordance with the connected jack.
! Do not connect other equipment between the TV and this unit. If they are con-
nected via a VCR, pictures may be distorted.
! Using the audio cable, you can listen to the TV sound with this unit.
" Positioning cables
Bundle up cables of the main unit and amplifier unit using each cord holder.
Main unit
Removing cord holders:
2
Cord holder
1
E-15
Video cable (supplied)
Amplifier unit
1 Move one side towards outside.
2 Lift up to remove.
Note:
If the image or sound is distorted, remove the AC power
cord and antenna wires from the holder.
If your TV is equipped with an S-video input jack or component video input jacks, pur-
chase an appropriate cable to enjoy higher quality images.
When you use a TV supporting progressive scan, open the initial setting screen and
set "PROGRESSIVE OUT" to "ON" in "TV MODE" (see page 44).
TV
To video
input jack
Notes:
! Change the TV input in accordance with the connected jack.
! Do not connect other equipment between the TV and this unit. If they are con-
nected via a VCR, pictures may be distorted.
! Using the audio cable, you can listen to the TV sound with this unit.
! If your TV has different indications for the component video inputs (Y, CB and CR
or Y, B-Y and P-Y), connect jacks with its matching color.
! Do not connect to a component video input jack designed for the high-vision sys-
tem, which is not DVD-compatible (the images may be distorted or not appear).
! Use a video cable, S-video cable or component video cable to connect the unit to
a TV.
Main unit
To component
video input jacks
Component video cable (commercially available)
S-video cable (commercially available)
TV
To S-video
input jack