Timer Playback - Sharp SD-HX500 Operation Manual

Timer playback

The unit starts playback or turns on the radio at a specified time.
This unit has 2 types of timer functions: "once timer" and "daily timer".
Once timer:
Once timer playback works for one time only at a preset time.
Use when...
You want to listen to a radio program on the day.
(After operation, the timer setting is canceled.)
Daily timer:
Daily timer playback works at the same preset time every day.
Use when...
You want to use the timer as a wake up call, or listen to the radio at the same time
every day.
You can use the once timer and daily timer together.
For example, use the timer as a wake-up call (daily timer), and listen to the ra-
dio later on the day.
1 Set the daily timer (pages 50 - 51).
2 Set the once timer (pages 50 - 51).
1 minute or more
Daily timer
Start Stop
Notes:
" If both timers are set for the same time, the once timer setting will start.
" When using both timers, allow at least 1 minute between operations. Otherwise
the timer used later will not work.
Before setting timer:
1 Set the clock (see page 17).
If the clock is not set to the correct time, the timers do not work properly.
2 Prepare a source to play back.
" Insert a disc to play.
" To use the radio for timer playback, store a station (see page 36).
Notes:
" When you use the timer to play a DVD with a menu screen, playback stops at the
menu screen.
" If the unit is unplugged or a power failure occurs after timer setting, the clock stops
and the timer setting will be canceled. Set the clock and timer again.
" You cannot use the timer to operate other equipment.
" Timer playback does not start if the unit is turned on at the start time.
Once timer
Start Stop
Setting the timer
SD-HX500
ENGLISH
E-50