Table of Contents
Advertisement
Note: Please remember that all cookers vary so temperatures
in your new ovens may differ to those in your previous
cooker.
Operating the Ovens
Turn the oven knob to the desired temperature (Fig. 2.20).
The oven indicator light will glow until the oven has reached
the temperature selected (Fig. 2.21). It will then cycle on and
off during cooking.
The Browning Element
The Browning Element is positioned in the top of the left-
hand oven. It can be used at the end of a normal cooking
period to give extra browning to au gratin dishes or give a
crisper finish to meat.
After the normal cooking is finished turn the left-hand
oven thermostat knob clockwise to the browning position,
indicated by (
) on the control knob.
Only the Browning Element will operate when the thermostat
is turned to this position. The top and base cooking elements
will switch off automatically.
Using the Clock
You can use the clock to turn the left-hand oven on and off.
The clock must be set to the time of day before the oven
will work.
Note: When using the timer functions, first set the clock as
required before setting the oven temperature.
The oven can be switched on when the cook symbol [ ] is
displayed.
Setting the Clock
1.
The LCD clock is shown in (Fig. 2.22). Once the cooker is
connected and switched on, the display flashes (00 . 00 )
and the time starts from (00 . 00 ).
2.
To set the clock press the [+] and [-] buttons
simultaneously, the point between hours and minutes
will start to flash for 5 seconds. Whilst the point is
flashing press either the [+] or [-] button to set the
correct time.
IMPORTANT: The timed oven will not operate unless the
clock has been set.
Program Selection - Setting the Minute Minder
The minute minder [ ] provides the ability to set a
countdown from 00 . 01h to 23 . 59h, at the end of which an
alarm will sound.
1.
Press the mode [M] button once (Fig. 2.23). The bell
symbol [ ] will flash on the display. Select the desired
countdown from 00 . 01h to 23 . 59h using the [+] or [-]
button (Fig. 2.24). The countdown will automatically
begin and the [ ] symbol will show in the display.
2.
Once the specified time has elapsed an alarm will
sound.
3.
To stop the alarm press any button.
Fig. 2.22
ArtNo.306-0001 - 3-button clock
Fig. 2.23
ArtNo.306-0001 - 3-button clock
Fig. 2.24
ArtNo.306-0001 - 3-button clock
Fig. 2.25
ArtNo.306-0001 - 3-button clock
Fig. 2.26
ArtNo.306-0001 - 3-button clock
Fig. 2.27
ArtNo.306-0001 - 3-button clock
9
Advertisement
Table of Contents
