Logon Screen - ADC H4TU-C-388-L1 User Manual

LTPH-UM-1122-02, Issue 2
Most VT100 emulation programs support a print screen option. For Windows-based programs,
such as Procomm or HyperTerminal, refer to the Help menu for instructions.
Monitor Performance
ID: xxxx--xxxx--xxxx—-xxxx
Circuit ID Number
Press this key: To access this menu:
Monitor
M
Performance
P
Event Log
E
C Config
I Inventory
O Report
H4TU-C-388 List 1
Menu bar
Event Log Config
+------------------------------------------+
|
| ADC DSL Systems, Inc.
| HDSL4
|
| Voice: 800.638.0031
| Fax : 714.730.2400
+------------------------------------------+
01/04/2002 12:30:01
Date and Time
Figure 3. Logon Screen
Table 4. Logon Screen Menus
Menu Functions
Monitors loopbacks and alarms, and provides a graphical representation
of circuit activity, including ES, UAS, SES, and line code.
Provides performance and alarm histories for current, 25-hour, 48-hour,
or 31-day periods for either the DS1 or HDSL4 interface.
Identifies the 100 most recent system events and reports the date and
time of occurrence.
Provides standard configuration options, ADC options, BER tester
(BERT), date and time setting, and a reset option (factory settings). Also
provides a master clear option that clears all performance, alarm, and
event log entries. Selecting the Config menu after a remote logon displays
the BERT Generator menu, which provides access to the BERT Signal
Generator configuration submenu.
Provides product information about the various devices that are in the
system and lists circuit and device identifications.
Provides four types of reports: Full Report, Short Report, System
Information Report, and Event Report.
September 12, 2003
Inventory Report Rlogon
|
|
|
|
|
|
H4TU-C
Logon Device
Provisioning
Help
System: OK___
System Status
Continued
13