Table of Contents
Advertisement
Provisioning
P
ROVISIONING
There are two methods for provisioning:
•
Use the MODE and SEL buttons on the front panel of the H4TU-C to:
—
Set system options
—
Reset the H4TU-C to its factory default settings for system options
—
Display system option settings (scroll mode)
—
Select system loopbacks
•
Use a maintenance terminal (VT100 terminal or a PC running terminal emulation software) connected to the
H4TU-C craft port (or to an HMU craft port) to access the maintenance screens
gives you full access to all H4TU-C status, history, inventory, and provisioning screens.
No dip switches or jumpers are required to provision the H4TU-C-388 List 1 as it contains a
non-volatile RAM (NVRAM) which stores the system option settings. System option settings are
retained if shelf power is lost or if the H4TU-C-388 List 1 is unplugged.
U
MODE
SING THE
Setting Options through MODE and SEL
To provision the H4TU-C-388 List 1 through the MODE and SEL pushbuttons on the front panel:
1
Press the MODE button for 1 second and then release it. The front-panel display alternately shows the first
system parameter and its current setting.
2
Press the SEL button to step through all possible settings of the selected parameter. (See
and
Table 6 on page
3
After the desired setting has been selected, press the MODE button. This updates the currently displayed
parameter to the selected setting, then advances to the next configurable parameter. After the last parameter
has been selected, a CONF NO message appears on the front-panel display.
4
Do one of the following:
•
To cancel the session without saving the requested parameter changes, press the MODE button or do
nothing. (After 30 seconds, the display returns to its normal mode without saving the new changes.)
•
To accept the requested parameter changes, press the SEL button. (A CONF YES message displays and
returns to its normal mode after saving the new changes.)
10
SEL B
AND
UTTONS
20.)
September 12, 2003
LTPH-UM-1122-02, Issue 2
(Figure 3 on page
13). This
Table 5 on page 19
H4TU-C-388 List 1
Advertisement
Table of Contents
