Viewing System Screens; Connecting To A Maintenance Terminal; Logon Screen - ADC Campus-RS Remote User Manual

152-402-145-02, Issue 2
V S
IEWING
The H2TU-R-402 supports both local and remote logon through a maintenance terminal (ASCII terminal or PC
running terminal emulation software) connected to its front-panel craft port.
From the maintenance terminal you can access menus and screens that are replications of those viewed at the H2TU-C. You
can view system settings and inventory, initiate loopbacks, and monitor performance. If the Remote Provisioning option is
enabled at the H2TU-C, you can configure the circuit.
Initial provisioning of the HiGain HDSL2 system is performed at the H2TU-C line unit. For more
information about the HiGain HDSL2 screens, provisioning, and troubleshooting, download the
appropriate H2TU-C line unit user manual from the ADC website at www.adc.com. To order a
hard copy, please contact your sales representative.
C
ONNECTING TO A
To connect to a maintenance terminal:
1 Connect a standard 9-pin serial cable to the RS-232 craft port
panel.
2 Connect the other end of the cable to the serial port on the maintenance terminal.
3 Start a terminal emulation program such as ProComm (emulating a VT100 terminal).
4 Configure the maintenance terminal to the following communication settings:
•
9600 baud
•
No parity
•
8 data bits
•
1 stop bit
•
Hardware flow control to OFF
5 If necessary, press
L S
OGON CREEN
The maintenance terminal screens allow you to monitor, provision, and troubleshoot the HiGain HDSL2 system.
To select a menu from the HiGain HDSL2 logon screen
•
Press the first letter of the menu.
•
Use the arrow keys to select the menu, and then press
Table 2 on page 8 describes the Logon screen menus.
are also listed in the onscreen Help menu.
H2TU-R-402
S
YSTEM CREENS
M
AINTENANCE
CTRL + R to refresh the HiGain HDSL2 logon screen.
June 16, 2000
T
ERMINAL
(Figure 1 on page
(Figure 3 on page 8), do one of the following:
ENTER
.
Table 3 on page 9 summarizes the navigational keys. They

Viewing System Screens

3) on the H2TU-R-402 front
7