Servicing The Engine Oil - Toro TimeCutter SS 4250 Operator's Manual

Hide thumbs Also See for TimeCutter SS 4250:
Table of Contents

Advertisement

Servicing the Engine Oil

Oil Type: Detergent oil (API service SF, SG, SH, SJ,
or SL)
Crankcase Capacity: 2.4 L (2.5 US qt)
Viscosity: See the table below.
Figure 30
Checking the Engine-Oil Level
Service Interval: Before each use or daily
Note:
Check the oil when the engine is cold.
WARNING
Contact with hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing, and other
body parts away the muffler and other hot
surfaces.
Important:
Do not overfill the crankcase with oil,
because damage to the engine may result. Do not
run engine with oil below the Low mark, because
the engine may be damaged.
1.
Park the machine on a level surface, disengage
the blade-control switch, shut off the engine,
engage the parking brake, and remove the key.
2.
Make sure that the engine is stopped, level, and
is cool so that the oil has had time to drain into
the sump.
3.
To keep dirt, grass clippings, etc., out of the
engine, clean the area around the oil-fill cap and
dipstick before removing it
g029683
(Figure
31).
33
Figure 31
Changing the Engine Oil and Oil
Filter
Service Interval: After the first 5 hours/After the
first month (whichever comes
first)—Change the engine oil and
filter.
Every 100 hours/Yearly (whichever comes
first)—Change the engine oil (more often in
dusty, dirty conditions).
Every 100 hours/Yearly (whichever comes
first)—Change the oil filter (more often in dusty,
dirty conditions).
Note:
Change the engine-oil filter more frequently
when operating conditions are extremely dusty or
sandy.
Note:
Dispose of the used oil at a recycling center.
1.
Park the machine on a level surface to ensure
the oil drains completely.
g029368

Advertisement

Table of Contents
loading

This manual is also suitable for:

Timecutter ss 5000Timecutter mx 5000747237473174775

Table of Contents