Starting The Engine; Operating The Blades - Toro TimeCutter SS 4250 Operator's Manual

Starting the Engine

Note:
A warm or hot engine may not require choking.
Important:
Do not engage the starter for more
than 5 seconds at a time. Engaging the starter
motor for more than 5 seconds can damage the
starter motor. If the engine fails to start, wait 10
seconds before operating the engine starter again.
Figure 11

Operating the Blades

The blade-control switch engages and disengages
power to the mower blades. This switch controls
power to any attachments that draw power from the
engine, including the mower deck and cutting blades.
Engaging the Blades
Important:
Do not engage the blades when the
machine is parked in tall grass. Belt or clutch
damage can occur.
Note:
Always engage the blades with the throttle in
the F position.
AST
Disengaging the Blades
g027581
1. Power-takeoff (PTO) switch
20
Figure 12
Figure 13
g027582
g027538