Table of Contents
Advertisement
Only certain types of glass, glass-ceramic,
•
earthenware or other glazed containers
are suitable for use on the warming zone;
others may break because of the sudden
change in temperature.
Only certain types of stainless steel,
•
enamelled steel or cast iron cookware with
enamelled bases are suitable for induction
hob cooking.
Take care NOT to scratch the surface when
•
placing cookware on the glass panel.
Only certain types of glass, glass-ceramic,
•
earthenware or other glazed containers are
suitable for hotplate cooking; others may
break because of the sudden change in
temperature. NEVER cook directly on the
hob surface (Fig. 1.4).
DO NOT leave the hob zones switched on
•
unless being used for cooking.
DO NOT stand or rest heavy objects on the
•
hob. Although the ceramic surface is very
strong, a sharp blow or sharp falling object
(e.g. a salt cellar) might cause the surface
to crack or break (Fig. 1.5).
WARNING:
Should a crack appear in
•
the surface, disconnect the appliance
immediately from the supply and arrange
for its repair.
ALWAYS LIFT cookware off the hob.
•
Sliding the griddle plate or pans may cause
marks and scratches (Fig. 1.6).
Take care NOT TO PLACE HOT LIDS onto
•
the hob surface (Fig. 1.7). Lids that have
been used to cover a hot pan can "stick"
or create a "vacuum" effect to the Glass
Hob. Should this occur, DO NOT attempt
to lift the lid off the glass surface, this may
damage the glass. Instead slide the lid to
the edge of the hob surface and remove,
taking care not to scratch the hob surface.
Alternatively wait until the lid has cooled to
room temperature, the vacuum has been
Fig. 1.4
ArtNo.312-0001 Not cooking surface
ArtNo.312-0003 Moving pans
ArtNo.312-0001 Not cooking surface
5
Fig. 1.3
Fig. 1.5
Fig. 1.6
Fig. 1.7
Advertisement
Table of Contents
