Clover CDR0430 Instruction Manual page 83

Stand-alone 4 channel
Table of Contents

Advertisement

Contents
Click "Send" when done. The screen will show as below.
If registration is complete, click "Exit" to register another DVR product or just
close the window.
To login, just input your ID and Password. The Password Again and E-
Mail will not be needed.
To set the Dynamic IP from DVR Unit, set the "IP type" to "DHCP". If the
network is connected, DHCP will automatically set an IP address. When
"DHCP" is selected, all the numbers will be set to "0". Save and restart the
DVR.
When the DVR has started, from the menu select "Setup
System
Network
Settings
Local IP" to check if the numbers are set as shown below. If the
numbers have not changed, please check the network connection.
- 82 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdr0410

Table of Contents