Clover CDR0430 Instruction Manual page 18

4-4-4. Network Cable Connection (Not Available on CDR0410)
Our Network Cable Connector is designed for RJ45 type cables.
Connect the Network cable here to utilize the network function of the DVR
4-4-5. Mouse Connection
This port is designed for PS/2 devices.
Connect the mouse here to utilize the device in the DVR system
4-4-6. Sensor Connection
.
trigger
4-4-7. Alarm Output Connection
trigger trigger
The DVR unit has 4 Input ports for Sensors.
To connect, press the trigger to open the socket
Note : the trigger may be difficult to press.
To connect Alarm Output, Connect one end of the cable to the
Common socket (COM) and the other to either Normal
Open(N.O) depending on system setup.
Like the Sensor Connection (Refer to 4-3-6), the trigger must
be pushed to insert the cable.
- 17 -
Contents