Clover CDR0430 Instruction Manual page 29

Auto Sequence
The time frame of the screen shown can be adjusted through the SCREEN
option in the Menu. (Refer to Chapter 6-6-3. Sequence Setup)
5-5-4. PAN / TILT & ZOOM
In this chapter, the user will be instructed on how to connect a PAN / TILT
Camera and how to operate it through the DVR Unit.
Refer to Camera Specs / Manual for information
5-5-4-1. How to Connect PAN / TILT Device
Connect the RS-485 lines to the rear terminal port of the DVR
Unit
After connecting the Camera to the RS-485 Port, Refer to
chapter 6-8-6. RS-485 Setup and chapter 6-8-7. PAN / TILT
Device setup for software configuration.
- 28 -
Contents