Clover CDR0430 Instruction Manual page 78

Stand-alone 4 channel
Table of Contents

Advertisement

6-8-3-2. Time Setup
The Time can be set by pressing enter while selecting the time and adjusting the
numbers using the UP / Down key and moving through the digits using the Left
/ Right key. If done, press Menu to exit.
To manually edit the Time, press the Menu button to enter the main menu,
select the System option using the Up / Down button and press Enter to
enter the System menu.
From the System menu, select the Time Set option using the Up / Down
buttons and press Enter to proceed.
From the Time Set menu, select the Time Set option using the Up / Down
button and press Enter to start editing. When editing is complete, press the
Menu button to stop editing.
Select the Apply option using the Up / Down buttons and press Enter to
apply the changes made.
To apply the time set, the user must select Apply and press Enter.
- 77 -
Contents

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdr0410

Table of Contents